Control Chief TM6000 Manual del operador descargar pdf (Pagina 97)

TM 10-3930-660-10

0010 00-1

TROUBLESHOOTING PROCEDURES 0010 00

Table 1. Troubleshooting Procedures.

MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION

1. Engine Will Not Crank. Check to see if range select

control lever is in the Neutral

“N” position.

Move range select control lever

to “N” position (WP 0004 00).

Check for loose or disconnected

battery cables.

Notify Maintenance.

2. Engine Cranks But Will Not Start. 1. Check to see if the auxiliary

fuel shut-off switch is in the

OFF position.

Move the auxiliary fuel shut-off

switch to the ON position (WP

0004 00).

2. Check to see if fuel tank is

empty.

Fill fuel tank (WP 0021 00).

3. Check the ambient

temperature.

Use the engine primer button in

extreme cold temperature to start

the engine (WP 0006 00).

4. Check the fuel/water separator

for water.

Drain the fuel/water separator

(WP 0019 00).

5. Check to see if any fuel lines

are damaged.

Notify Maintenance.

3. Engine Misfires or Runs Rough. 1. Check to see if fuel tank is low

or empty.

Fill fuel tank (WP 0021 00).

2. Check to see if any moisture is

present in fuel/water separator.

Drain the fuel/water separator

(WP 0019 00).

3. Check for black or gray

exhaust smoke. Plugged or

dirty intake system.

Clean or replace air filters (WP

0017 00).

4. Check for white or blue smoke.

Indicates engine is cold.

Allow engine to warm up.

5. Check for leaks in fuel lines

and injectors.

Notify Maintenance.

4. Low Engine Power. 1. Check air filter restriction

indicator.

Clean the air filter (WP 0017 00).

2. Check the exhaust pipe for

obstruction.

Remove any obstructions.

3. Check for high engine oil

level.

Notify Maintenance if oil level

is high.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 200 201

Comentarios a estos manuales

Sin comentarios

Control Chief TM6000 Manual del operador Pagina 97

Comentarios a estos manuales