Control Chief TM6000 Manual del operador descargar pdf (Pagina 60)

TM 10-3930-660-10

0005 00-8

OPERATION UNDER USUAL CONDITIONS - CONTINUED 0005 00

STEER FORKLIFT - CONTINUED

1. 4 Wheel Steering

. Move steer select control switch to the right position. The front wheels will steer the direction that the

steering wheel is turned; the rear wheels will steer in the opposite direction. This mode allows an extremely short turn

radius. It also enables the rear wheels to follow the tracking of the front wheels which is an advantage in mud or sand con-

ditions.

2. 2 Wheel Steering

. Move steer select control switch to the center position. The front wheels will steer in the direction that

the steering wheel is turned. The rear wheels will remain in the fixed forward position. This mode is used for on-highway

travel or at higher speeds.

3. Crab Steering

. Move steer select control switch to the left position. All wheels will steer in the same direction. This mode

permits the operator to move the vehicle sideways toward the landing point of the load. This is especially helpful in

tight quarters on the job, where there is not enough space to move a conventional forklift back and forth several times

in order to line up at the exact spot in front of the loading location.

409-028a

409-029a

409-030

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 200 201

Sin comentarios

Control Chief TM6000 Manual del operador Pagina 60